Make sure this fits
by entering your model number.
â¡ãSUPERIOR PRODUCTSã: HOODDEAL Heat Shrink Spade Connectors are ISO CERTIFIED PRODUCT.Top of the line butt connectors for splicing 16-14AWG,12-10AWG, 22-16AWG wires, while at the same time protecting the connection from abrasion, water, chemicals, and more;
â¡ãPREMIUM COMPONENTSã: Translucent dual wall heat shrink tubing with adhesive inside provides high tensile strength; Tinned copper is a soft metal which lasts longer in wet weather conditions which also improves conductivity and provides a tough,corrosion-proof connection; Water tight 360-degree adhesive heat shrink tubing and high melting point tinned copper ensure minimal circuit failure and voltage loss;
â¡ãEASY TO USEã: 3:1 Heat Shrinkage Ratio. You just need a crimper tool and a hot melt professional tool to get the work done.Use the insulated blue crimp nest on your crimper for best results with your splice. Once crimped, heat up the connector with a hot melt tool.The tubing will shrink, while the adhesive lining will flow to seal the connection and provide protection from harsh environments such as outdoor exposure;
â¡ãWIDE APPLICATIONã: Whether you are working on your boat, vehicle, home or scientific project, HOODDEAL offers HIGH QUALITY insulated wire butt connectors in a handy and secure Box to help not only in making circuits right but to store them to be safe from dust, dirt and water so as to be used well in the future.
âã100% Safe Guaranteeã: Package includes 150PCS (50 Red+50 Blue+50 Yellow); Please do not hesitate to contact us if you meet any problems before ordering or after receiving our products. Refund / Replacement is allowed for any reasonable reasons.
HOODDEAL team provide the most professional and reasonable. We adhere to high standards of product quality requirements to provide customers with superior crimp connectors and best service.
HOODDEALâs spade connectors which fit 22-16 16-14 12-10 gauge wires are crafted from high quality tinned copper barrels in combination with dual wall translucent heat shrink tubing with adhesive inside.
Heat shrink wire connectors are connectors that seal your wires in a way that will eliminate any corrosion to the cables and secures the wire connectors heat shrink for the best connections.
We design many kinds of connector kits to help not only in making circuits right and easier in numerous wiring projects.
Our electrical spade disconnect connectors are compatible to be used in boats, cars, trucks, stereo audio AV, underground cable and home or scientific projects.
To get the best result use heat/ hot air gun;
Do not set on a high temperature at the beginning;
3:1 heat shrink adhesive lined tubes are made of flame retardant material which protects the joints from fire;
Tinned copper is a soft metal which lasts longer in wet weather conditions which also improves conductivity and provides a tough, corrosion-proof connection;
Water tight 360-degree adhesive heat shrink tubing and high melting point tinned copper ensure minimal circuit failure and voltage loss;
High Amperage Ratings:
Red : 22-16 AWG; Wire range: 0.5-1.5mmÂ²; Max: 19A ;
Blue :16-14 AWG; Wire range: 1.5-2.5mmÂ²; Max: 27A;
Yellow :12-10 AWG; Wire range: 4-6mmÂ²; Max: 48A;
Minimum shrink temperature: 176Â°F / 80Â°C
Full recovery temperature: 266Â°F / 130Â°C
Operating temperature: from -67Â°F to 257Â°F or -55Â°C to 125Â°C
EASY TO USE!
Gently Insert stripped wire into the connector;
Crimp the connector with a professional tool;
Apply heat evenly with a heat gun until the tube shrinks and the adhesive flows;